Platforms

TECHNICAL SPECIFICATIONS
• The pneumatic butcher work platform will be at least 1000*1500 mm in size, best suited to operating conditions, and covered on top
with aluminium sheet at least 3 mm thick.
• A railing of pipe with a diameter of at least Ø 1” will be fitted around the edges of the platform.
• The platform will be in the form of a pneumatic-piston stand working between heights of 500 mm and 1700 mm, and the platform's
lifting capacity will be at least 200 kg.
• The platform will have a foot control that can stop and raise it at any desired position.
• The platform will be centred and run on a slide system, with two 100x100x4 mm box profiles 1000 mm apart, over which a larger
120X120X4 mm profile is fitted with polyamide slides.
• The pneumatic piston will be at least 100 in diameter and will be delivered ready to operate with a foot pedal fitted that can stop it at the desired level.
• The platform will have a specially designed wash basin with hot and cold water connection and a 6-place water knife steriliser.
• An apron washing unit will be provided on the platform for the operator working there.
• A 20 cm wide protective strip of 2 mm stainless sheet will be placed in front of the platform deck.
• If desired, the platform deck can be folded 90 degrees for cleaning, and will be closed when the slaughterhouse is cleaned.
• The pneumatic unit of the platform will be mounted on the platform.
• The platform will be made entirely of 304-grade stainless material.